|Fittings:||Buckles & Tie Strings|
|Weight:||731 grams/25.79 oz|
|Material 1:||Galvanised Mild Steel|
Armour for the Medieval KnightEpic Armoury’s Epic Black Complete Milanese Armour is a set of plate inspired by medieval armour and low-fantasy settings. The set includes a breastplate, pauldrons, faulds and tassets, and couters--all that is left is the gambeson and clothing you desire to complete your LARP character’s look. Made of 1 mm thick galvanized mild steel and leather straps and fittings, this armour is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care. Each piece has been treated with Epic Armoury's Epic Dark Metal coat to give the armour a rugged, antique finish and to prevent rust.
Available in sizes Medium, Large, and X-Large; and in colours Polished Steel and Epic Dark.
Epic Dark Milanese Armour Breastplate
Milanese Armour is a simple piece of armour protecting the front of the torso and abdomen. The plate rests at the waist and is sculpted to fit the body and add structural strength to the steel. The Milanese Armour is embellished with a beveled plate on the chest to deflect attacks.
Epic Dark Milanese Pauldrons
The Milanese Pauldrons are a pair of shoulderguards. The pauldrons rest on top of the shoulders and cover the upper arms and a large portion of the upper back. Both are attractively curved to add structural strength to the steel while maintaining flexibility thanks to the overlapping plates. Asymmetrical in design, the left pauldron is fitted with a vertical plate designed to protect the head from glancing blows. These pauldrons are embellished with a top beveled plate to further deflect attacks, as well as a chain pin to attach an insignia. Secure them by tying the canvas ties to the breastplate, and pulling the leather straps tight around the upper arms.
Epic Dark Faulds and Tassets
The Faulds and Tassets are designed to protect the waist, hip and upper thigh from attacks that might leave you off balance, wounded, and vulnerable while on the battlefield. This armour limits your weak spots without limiting your mobility thanks to the articulation of its bottom plate. They are secured with two adjustable leather straps over the shoulders and another around the waist.
Epic Dark Milanese Couter
The Milanese Couter is a pair of guards that protect the entire elbow--including the sides and a portion of the arms, thwarting even the most determined soldier. Its shape is intended to not only block blows, but to deflect them away safely. A curved shelf is riveted and welded along its edge, catching strikes that would otherwise slide onto the arms. One leather strap is used to keep each of the couters in place. Conveniently placed eyelets can be used to attach the couter firmly to a gambeson or shirt.
Inspired by Medieval History
- Historically designed with sculpted ridges and overlapping plates to provide reinforced protection and to deflect attacks on a chaotic battlefield
- Plate armour became more popular as firearm technology became more prevalent during the 13th century
- Made from 1mm/19 gauge thick mild steel
- Rolled edges with no sharp edges
- Straps and fittings made from top-grain leather
- Hand made, welded pieces for maximum durability
- Epic Armoury Dark oxidization resistant coating
This product is handmade and hand-painted and therefore unique. As a result, when compared with similar item numbers, this product can have natural deviations in pattern, colour and shape, which are not considered defects or faults.
We produce our image material in a natural environment, where lighting and surroundings can affect colors and contrast. The displayed images may therefore appear different from the product you receive from us.
Measurements are all in cm if not stated otherwise.
Epic Armoury metal works products should be treated with a wax or quality acid-free vegetable oil and kept in dry storage. Metal armour containing leather parts would needs a separate maintenance for the leather. Please read the "Leather Straps and Fittings" section below for leather cleaning and maintenance using leather-care products.
Degreasing and preparing your armour for use
When you open your armour, you may be overwhelmed by the smell of grease and oil. The oil has been applied to protect your armour during storage and transport. Use a degreasing product or mineral spirits and a dry cloth or paper towels to remove all the oil from your plate armour parts. Chainmail is a bit harder to remove all the oil from the links, but it can be done in much the same way. Wipe off as much as you can with a dry cloth, and with the remaining oil, you can remove the grease from the chainmail with mineral spirits or another solvent by spraying it on the links. You can also choose to fully submerge your chainmail in a degreasing product and use your hands to agitate the metal in the solution, this will completely remove all oil and grease from your links. After removal of the oil, make sure to dry your armour thoroughly. Strong, warm sunlight is great for drying your armour, but you can also use a hairdryer or a heat gun to speed up the process. Be careful not to overheat any leather parts when using a heat gun.
Moisture is the enemy of armour and chainmail. If your armour does get wet, it is important that you dry it thoroughly as soon as possible. After handling, wearing, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the clean surface with a quality acid-free vegetable oil. Alternatively, you can apply a coating of wax to the entire surface of the exposed metal. Allow the wax to dry for a couple of hours and then buff it lightly with a soft cloth.
Rust-Prevention and Removal
Store your armour is a dry place and check it every couple of months for signs of rust. If any is found, remove it by gently rubbing the affected spot with a mildly abrasive pad dipped in wax or quality acid-free vegetable oil. Epic Dark products are specially treated to resist rust, but should still be treated with oil and kept in dry storage.
Leather Straps and Fittings
Clean by removing dirt with a hard brush, then gently rub on leather soap with a clean, damp cloth until the leather appears clean. Remove soap with a separate damp cloth to wipe away any soap residue and then use a dry cloth to wipe away any remaining water from the leather.
You should always condition leather after cleaning, since the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax polish with a clean cloth, gently rubbing a small amount of oil or polish in circles into the leather. Allow the leather to soak in the oil before wiping the leather with a final clean cloth to remove any excess residue.
All prices are without vat